we have obtained the trust of consumers around the world. We will give greatest companies and substantial high quality products with all sincerity. ensures the steadiness and regularity of the crucial function of elements.

4-EPTTs Flexo EPT Slotting and Die-Cutting EPTT

Operate element:
EPTT operation portion
one. Memory reset: Throughout the functioning method, if the EPTT requirements to wipe and adjust the plate, it can immediately restore to the unique placement right after the EPTT closed.
two. EPTTled anilox roller raise: When a team of short-term does not demand printing, the EPTT can handle this team anilox roll not decrease, and therefore there is no need to clean the ink roller.
three. Placement reset: The EPTT can reset the plate place, the area of the making use of plate can be when in spot, tests printing two can correct location in EPTT.
4. Primary electrical motor photo show automobile speed, paper feed, even paper, individual pieces and so on.
five. Display screen display screen orEPTTset number and real manufacturing quantity, EPTT stop feeding following working quota comprehensive and anilox roller will separate from printing plate immediately
six. OrEPTTpreset operate: In accordance to the requirement of the orEPTTyou can EPTTr the dataof box size, width, heigEPTT quantity and so forth. on EPTto modify the charater of box,and Intelligent restored close by.(max restored order: 999).

Data incEPTT:
Every printing placement
Slotting situation
Box heigEPTT place
Box duration and width
Paper heigEPTT and width
The EPTT can EPTT restored nearby soon after EPTTr, will not want end EPTT.
Knowledge storage: When the info of processing is proper, it can autosave the information.

Configuration part:
Feeding device (1 group)
Feeding unit precision: plusmn one. mm

1.EPTT clutch
1)EPT established on-off alarm and steady alarm in progressing to ensure staff basic safety.
2) Among every landline station outfitted with emergency end switch, EPTT can be inside managed to quit relocating to ensure the security of the interior employees.
three) Complete EPTT locking

two. Dust removing program
one) Geared up with brush to remove dust on the printing surface area and boost the printing top quality..
2) Outfitted with static electricity technique.

3. Convey roller
one) The diameter of the upper roller is 141.9mm. (In accordance to the designs provided)
2) Seamless pipe, wrapped in dress in-resistant rubber, and to do the balXiHu (West EPT) Dis.Hu (West EPT) Dis.ng correction.
3) The diameter of the decrease roller is 172mm, embossed tough chrome plating.
four) The gap scale modified through the worm,l the adjustment range of -12mm.
aluminium alloy floor

4. EPTT feeding procedure management
one) Still left baffle, rigEPTT baffle and thrust baffle altered by electrical adjustment.
2)Back baffle manual change.
3)With counting quit technique, foot pedal extended to 900 mm and the EPT device (1color/established) (optional ceramic anilox roller)

EPT precision: plusmn0.5mm(reset precision: plusmn0.15mm

one.EPT roller
one) OD is 376mm/390mm(In accordance to the design offered).
2) Floor is grinded and tough chrome.
3) Treated with dynamic and static equilibrium calibration.
4) Fixed ratchet wheel roller.
five) Adopt plate-hanging system, easy to install, appropriate for 10mm hanging lath.
six) Push plate is fastened or taken off by phase switch EPT manage in excess of clockwise and anticlockwise revolving.

two. EPT platen roller
one) OD is 172mm.
2) Floor is grinded and tough chrome.
three) Treated with dynamic and static harmony calibration.
four) Gap is manually adjusted, assortment: -12mm.

3. Anilox roller
1) OD is 198mm. (According to the design presented)
two) Steel pipe carved textured surface area right after EPTT processing.
three) Line shops, inking uniform and tough.
four) Sculptured by EPTT processing techniques that can proEPTT the life of the plate roller and rubber roller.
5)Guide alter the pressure amongst anilox roller and printing plate, adjustment assortment:three.five-8mm.

four. EPT roller
one) OD is 178 mm.
two) Wrapped with corrosion-resistant rubber.
three) Making use of EPTT grinding and the influence of the ink transfer is very good.
four) Handbook adjust the stress amongst anilox roller and rubber roll, adjustment range:-5mm.

5. World EPT construction
1) Planetary EPT building
two) EPTT exhibit stage guidelines to make the procedure a lot more convenient, intuitive, correct.
three) Utilizing electrical EPTT 360 degrees adjustment (managing, end evenly adjustable). Phase modulation precision up to .15mm
four) EPT roller modify stage by electrical, dynamic and static unEPTTany placement adjustment. Area can be reset if located area displaced soon after transferring, precision up to .5mm.
5)Adsorb feeding system

six. Ink circulation program
one) EPT diaphragm pump, steady ink provide, easy to function and maintain.
two) Membrane pump equipped preserve ink unit , can save the ink effectively
3) Outfitted with lack ink alarm method.

Slotting device
slotting precision: plusmn1. mm

1. Creasing roller
1) Diameter is 115mm(According to the design provided), twice grinding processing, difficult chromed and grinded, transferring steady.
2) Gap is manually modified, variety: -12mm.
three) Upper wheel made of substantial high quality EPTTed polyurethane.

two. Slotting knife relaxation transverse altering system
one) Diameter is 154mm, two times grinding processing, hard chromed and grinded, shifting steady.
2) Width is 7mm.
three) Alloy device metal materials with indent heat remedy, hardness and toughness is fantastic.
four) Alloy steel by warmth treatment method with grinding trimming knife, sharp knife and higher precision.
five) Creasing roller, convey roller and slotting knife rest transverse, which use of central handle program EPTTr information.
6) Geared up with EPTT photoelectric. When the upper knife EPTTr the reduce knife groove, the knife plate can shift efficiently so that can stop the dress in triggered by the blade in irregular procedure.

3. Slotting phase modifying system
1) Planet EPT framework.
two) HeigEPTT and slotting: central handle program EPTTr data(360-degree procedure, end, each constructive and negative can be operated).
three)5 knife shift.
Die-chopping device
Die-reducing precision: plusmn1. mm

1.Capabilities
one)The template roller and urethane roller decrease the EPTT no-load load by eccentric cylinEPTTdevice shaft EPT disengaged at the identical time to prolong the existence of urethane roller and die cutter.
2)The earth structure stage adjustment, 360-diploma operation, end, both optimistic and negative can be operated, period modulation precision of up to plusmn .15mm handy to operate.
3)EPTT display section guidelines to make the operation a lot more hassle-free, intuitive, precise.
four)Urethane roller mechanical EPT and shift all around 30 mm, with the radial differential gadget, can significantly increase the lifestyle of the rubber roller by sporting evenly dispersed.
5)EPTTry equipped with urethane correction device that can be continuously amended.
6)Equipping stripping system with belt conveyors

two.Template roller
one)360mm(not incEPTT blade)
2)Alloy steel seamless tube grinding, hard chrome plating.
3)Fixed template screw gap spacing, aXiHu (West EPT) Dis.al 100mm: Radial 18mm aliquot.
four)Applicable die cutter heigEPTT twenty five.4mm.
5)The die cutter planks thickness: 16mm(3 paperboard)
15mm(five paperboard)
6) Template stick can be moved aXiHu (West EPT) Dis.ally for twenty mm, and more convenient to the plate.

three. EPT mat roller
1) 389mm
two) Alloy metal seamless tube grinding, challenging chrome plating.
3) Urethane roller thickness is 10mm, width is 250mm 8000000 instances offered in EPTT.
four) Urethane roller geared up with differential pace payment, employing a rubber roller and template roller alwaEPTTautomatically preserve line speed, correcting die-chopping mistake properly. Provider daily life is improved drastically so that every batch of products geometry values is regular and lowering replacement EPTs every single time.

Supply device
1.Splicing arm
1)Guide and computerized procedure
two)Push belt splicing arm independently change the tightness, and can be arbitrarily chosen quantity of splicers arm.

two.Platform carry
one)EPTTful EPT EPT
two)The stacking heigEPTT is 1800mm
3)The bed platform carry EPT motor outfitted with brake function to keep a mounted place that will not drop.

three. Splicing baffle
one) EPT motived, the EPTion plate are instantly stretched to hold cardboard when the cardboards are stacked up to the reserve peak.
two) The place of rear baffle can be manual modified.
3) Airplane wrinkles belt, to prevent the cardboard decrease.

Generate EPT
1 Major EPT EPT.
one) Adopt 20CrMnTi alley metal, carburizing, grinding EPTs.
two) 6 stage (at the identical amount with the automobile EPTT EPT), operating effortlessly sounds, hardness EPTC58-62 EPTT-existence, standard does not use out in much less than ten many years, can obtain EPTT-term printing registration precision.

two. Essential link
one) Undertake the important url, can make the shaft and EPT connecting, there is no gap in the massive torque is employed, set up and servicing far more practical, make the EPTT in a substantial driving precision in the course of EPTT-phrase making use of, guarantee the registration precise.